Coda Audio LINUS14D
Husk at læse vores leveringsbetingelser
Specification
| GENERAL | |
|---|---|
| Number of output channels | 4 |
| Output stage | Class D-IC |
| Internal samplerate / bit-depth | 96 kHz / 24 bit |
| Signal-to-noise ratio (22 Hz – 20 kHz, 4 Ω – analogue input) |
>108 dB (unweighted) >111 dB (A-weighted) |
| Signal-to-noice ratio (22 Hz – 20 kHz, 4 Ω – digital input) |
>116 dB (unweighted) >119 dB (A-weighted) |
| Frequency response (8 Ω load with CLEAR preset) |
20 Hz – 20 kHz = (+0.0 dB /-1.0 dB) |
| THD+N & IMD (4 Ω load @ 1/2 output power) |
20 Hz – 20 kHz = < 0.005% |
| Latency (input to loudspeaker output) |
Minimum 2.70 ms AES/EBU input Minimum 2.00 ms analog input |
| Protection circuits | Inrush current limiter Thermal limiter Output DC SMPS over-current Output overload |
| LED indicators | Mute status Limit Signal Sensor Protection Ethernet control active Digital signal locked Dante™ Power on |
| Ethernet connection | 2 x 100 Mbps RJ45 Control 1 x 100 Mbps RJ45 Dante™ |
| AC Mains | |
| AC mains input connector | Neutrik 32A powerCON® |
| AC mains voltage (high range)** (dual voltage SMPS with automatic voltage range selection) |
180 V = Minimum 230 V = Nominal 265 V = Maximum |
| AC mains voltage (low range)** (dual voltage SMPS with automatic voltage range selection) |
90 V = Minimum 115 V = Nominal 132 V = Maximum |
| AC mains frequency | 47 – 63 Hz |
| Power consumption* (1/4 power = 600 W @ 4 Ω to represent typical music signal) |
Amplifier in standby = 17.6 W Amplifier idle = 191 W Amplifier ¼ power = 3200 W |
| Input | |
| Input sources | Analog & AES/EBU & Dante™ |
| Analogue input impedance (balanced) |
12 kΩ |
| Maximum input level (analog differential) | +18 dBu / 6.15 Vrms |
| Input connections | 4x XLR3 Analog IN 2x XLR5 Sensor IN 1X RJ45 LINET IN (8x CH) 1x RJ45 LINET LINK (8x CH) 1x RJ45 DANTE™ IN (4x CH) 1x RJ45 AUX |
| Supported digital input formats (internal SRC) |
32 kHz / 44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz |
| Output | |
| RMS output power* (20 Hz – 20 kHz, THD <0.01%) (all channels driven) |
1800 W @ 8 Ω 3500 W @ 4 Ω 4400 W @ 2.7 Ω 4500 W @ 2 Ω |
| Peak output power* (20 Hz – 20 kHz, 6 dB Crest Factor) (all channels driven) |
3600 W pk @ 8 Ω 7000 W pk @ 4 Ω 6500 W pk @ 2.7 Ω 5200 W pk @ 2 Ω |
| Maximum output voltage* | +/- 170 V pk |
| Maximum output current* | +/- 52 A pk |
| Damping factor (8 Ω load, 1 kHz & below) |
2500 |
| Minimum output load | 2 Ω nom 2.7 Ω for Sensor Control |
| Power output connections | 2x Neutrik NL4 speakON® 1x Neutrik NL8 speakON® |
| Thermal | |
| Operating temperature | +5°C to +55°C 41°F to 131°F |
| Thermal output (BTU/h) |
679.02 = Idle 2470.39 = 20 % 5159.16 = 50 % 9635.88 = 100 % |
| Thermal output (kWh) |
0.199 = Idle 0.724 = 20 % 1.512 = 50 % 2.824 = 100 % |
| Cooling | 2x thermally controlled fans Hot air expelled at rear |
| Physical | |
| Dimensions (WxHxD) | 483.5 x 88 x 454.18 mm / 19.04” x 3.46” x 17.88” (2 Rack units) |
| Shipping dim. (WxHxD) | 675 x 130 x 560 mm (0.049 m³) / 26.57” x 5.12” x 22.05” |
| Net Weight | 14.75 kg / 32.5 lbs. |
| Shipping weight | 17.5 kg / 38.6 lbs. Volume = 0.049 m3 / 1.73 ft3 |
